# Link outline to other editor

**URL:** <https://forum.literatureandlatte.com/t/link-outline-to-other-editor/30062>\
**Category:** Scrivener for Windows\
**Tags:** support\
**Created:** [April 22, 2015, 1:33pm UTC](https://forum.literatureandlatte.com/t/link-outline-to-other-editor/30062 "2015-04-22T13:33:25Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![dtcooper](https://forum.literatureandlatte.com/letter_avatar_proxy/v4/letter/d/85f322/32.png) [@dtcooper](https://forum.literatureandlatte.com/u/dtcooper)\
**Post date:** [April 22, 2015, 1:33pm UTC](https://forum.literatureandlatte.com/t/link-outline-to-other-editor/30062/1 "2015-04-22T13:33:25Z")

</div>

The manual mentions that it is possible to link the editors, so that clicking on a document in the outliner in one editor will load that document in the other editor.

But I can’t find any info about how to actually do that… Can anyone advise?

Cheers,  
David

---

<div class="post-metadata">

**Author:** ![Rdale](https://forum.literatureandlatte.com/user_avatar/forum.literatureandlatte.com/rdale/32/15925_2.png) [@Rdale](https://forum.literatureandlatte.com/u/Rdale)\
**Post date:** [April 22, 2015, 1:52pm UTC](https://forum.literatureandlatte.com/t/link-outline-to-other-editor/30062/2 "2015-04-22T13:52:25Z")

</div>

If the footer is visible under your outline, there should be a button with two arrows pointed in opposite directions. Click it so they turn blue.  
This works for the Corkboard mode as well. 😃

---

<div class="post-metadata">

**Author:** ![dtcooper](https://forum.literatureandlatte.com/letter_avatar_proxy/v4/letter/d/85f322/32.png) [@dtcooper](https://forum.literatureandlatte.com/u/dtcooper)\
**Post date:** [April 22, 2015, 4:44pm UTC](https://forum.literatureandlatte.com/t/link-outline-to-other-editor/30062/3 "2015-04-22T16:44:42Z")

</div>

Superduper, thanks! Looking forward to trying this out. I was feeling jealous of the Mac version’s ability to hoist the binder until i realised the same effect could be achieved by opening a folder as outline in a split editor. This will make it work full proper 😃
