# Scrivener AppImage

**URL:** <https://forum.literatureandlatte.com/t/scrivener-appimage/46430>\
**Category:** Scrivener on Linux (Unofficial)\
**Created:** [July 28, 2019, 7:31am UTC](https://forum.literatureandlatte.com/t/scrivener-appimage/46430 "2019-07-28T07:31:50Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![theswede](https://forum.literatureandlatte.com/user_avatar/forum.literatureandlatte.com/theswede/32/81_2.png) [@theswede](https://forum.literatureandlatte.com/u/theswede)\
**Post date:** [July 28, 2019, 7:31am UTC](https://forum.literatureandlatte.com/t/scrivener-appimage/46430/1 "2019-07-28T07:31:50Z")

</div>

Since I wanted to run Scrivener on a very low spec Chromebook I have converted for Linux, with very little hard disk making it unsuitable for a full Wine install and running a very slim and stripped Linux dsitribution, I started looking at turning the Linux beta version into an AppImage to be able to simply run it from a single file and not have to worry about dependencies and the like.

I figured this will save me space, and will save a lot of hassle in the long run since the AppImage will contain all dependencies, and should be possible to run on pretty much any x86 system which is running a Linux kernel.

Turns out I didn’t really have to put the effort into doing that, as I stumbled upon an already setup AppImage which does basic setup of the home directory and installs itself properly.

[wayoflinux.com/blog/scrivener-returns](https://www.wayoflinux.com/blog/scrivener-returns)

The advantage of an AppImage is that it’s really just one file containing the application with all its dependencies, and it should not need constant updating as one updates or changes the running OS.

---

<div class="post-metadata">

**Author:** ![jane477](https://forum.literatureandlatte.com/letter_avatar_proxy/v4/letter/j/2acd7d/32.png) [@jane477](https://forum.literatureandlatte.com/u/jane477)\
**Post date:** [July 8, 2020, 6:17pm UTC](https://forum.literatureandlatte.com/t/scrivener-appimage/46430/2 "2020-07-08T18:17:56Z")

</div>

> [@](#):
>
> Since I wanted to run Scrivener on a very low spec Chromebook I have converted for Linux, with very little hard disk making it unsuitable for a full Wine install and running a very slim and stripped Linux dsitribution, I started looking at turning the Linux beta version into an AppImage to be able to simply run it from a single file and not have to worry about dependencies and the like.
> 
> I figured this will save me space, and will save a lot of hassle in the long run since the AppImage will contain all dependencies, and should be possible to run on pretty much any x86 system which is running a Linux kernel.
> 
> Turns out I didn’t really have to put the effort into doing that, as I stumbled upon an already setup AppImage which does basic setup of the home directory and installs itself properly.
> 
> [wayoflinux.com/blog/scrivener-returns](https://www.wayoflinux.com/blog/scrivener-returns)
> 
> The advantage of an AppImage is that it’s really just one file containing the application with all its dependencies, and it should not need constant updating as one updates or changes the running OS.

That’s a pretty neat solution  
I was actually looking for something like that for a long time already  
thank you!

---

<div class="post-metadata">

**Author:** ![anon56864026](https://forum.literatureandlatte.com/letter_avatar_proxy/v4/letter/a/96bed5/32.png) [@anon56864026](https://forum.literatureandlatte.com/u/anon56864026)\
**Post date:** [July 17, 2020, 7:44pm UTC](https://forum.literatureandlatte.com/t/scrivener-appimage/46430/3 "2020-07-17T19:44:43Z")

</div>

I’m not in a position to use this yet so I have no feedback.

Thank you for the heads-up that this possibility exists.

---

<div class="post-metadata">

**Author:** ![josefcarel](https://forum.literatureandlatte.com/letter_avatar_proxy/v4/letter/j/e47c2d/32.png) [@josefcarel](https://forum.literatureandlatte.com/u/josefcarel)\
**Post date:** [May 14, 2021, 8:39am UTC](https://forum.literatureandlatte.com/t/scrivener-appimage/46430/4 "2021-05-14T08:39:31Z")

</div>

I get a message Internal Server Error for the site [wayoflinux.com/blog/scrivener-returns](https://www.wayoflinux.com/blog/scrivener-returns) What’s the problem? There is any alternative? I hope  
Thanks  
Josef

---

<div class="post-metadata">

**Author:** ![theswede](https://forum.literatureandlatte.com/user_avatar/forum.literatureandlatte.com/theswede/32/81_2.png) [@theswede](https://forum.literatureandlatte.com/u/theswede)\
**Post date:** [June 1, 2021, 10:56pm UTC](https://forum.literatureandlatte.com/t/scrivener-appimage/46430/5 "2021-06-01T22:56:04Z")

</div>

Should be possible to get it from archive dot org.

EDIT: Just tested, and the 32 bit version downloads, but not the 64 bit. I will find a mirror to put the multilanguage 64 bit version up tomorrow. Must sleep now.

> **[The Return of Scrivener](https://web.archive.org/web/20210427125901/https://wayoflinux.com/blog/scrivener-returns)**
>
> Scrivener, the uncontested ruler of the writing software landscape, had sadly never been released for Linux. While the last beta version remains open and free to use forever, in newer Linux distros installation was far from straightforward or...

---

<div class="post-metadata">

**Author:** ![theswede](https://forum.literatureandlatte.com/user_avatar/forum.literatureandlatte.com/theswede/32/81_2.png) [@theswede](https://forum.literatureandlatte.com/u/theswede)\
**Post date:** [June 9, 2021, 8:15pm UTC](https://forum.literatureandlatte.com/t/scrivener-appimage/46430/6 "2021-06-09T20:15:27Z")

</div>

Here is a link to the 64 bit full language pack AppImage, as posted on wayoflinux.

> **[Scrivener-1.9.0.1beta-x86\_64\_language\_pack.AppImage.tar.gz](https://www.dropbox.com/s/bnsysjubsyq45ud/Scrivener-1.9.0.1beta-x86_64_language_pack.AppImage.tar.gz)**
>
> Shared with Dropbox

---

<div class="post-metadata">

**Author:** ![Drylandfish](https://forum.literatureandlatte.com/letter_avatar_proxy/v4/letter/d/b9e5f3/32.png) [@Drylandfish](https://forum.literatureandlatte.com/u/Drylandfish)\
**Post date:** [June 18, 2023, 8:08pm UTC](https://forum.literatureandlatte.com/t/scrivener-appimage/46430/7 "2023-06-18T20:08:57Z")

</div>

Hey fellow depreciated Linux users.

I had run such a version for years until my laptop drive crashed. Fortunately my  
old projects are backed up, however I can’t find a viable Linux version to install now. I note the appimage blogpost and the above dropbox link are expired. Any leads on the appimage, etc?

Much thanks!

John

---

<div class="post-metadata">

**Author:** ![theswede](https://forum.literatureandlatte.com/user_avatar/forum.literatureandlatte.com/theswede/32/81_2.png) [@theswede](https://forum.literatureandlatte.com/u/theswede)\
**Post date:** [June 18, 2023, 8:31pm UTC](https://forum.literatureandlatte.com/t/scrivener-appimage/46430/8 "2023-06-18T20:31:40Z")

</div>

Can’t edit the above, but this should work.

> **[Scrivener-1.9.0.1beta-x86\_64\_language\_pack.AppImage.tar.gz](https://www.dropbox.com/s/69u65ku4x6i5nhn/Scrivener-1.9.0.1beta-x86_64_language_pack.AppImage.tar.gz?dl=0)**
>
> Shared with Dropbox

---

<div class="post-metadata">

**Author:** ![Drylandfish](https://forum.literatureandlatte.com/letter_avatar_proxy/v4/letter/d/b9e5f3/32.png) [@Drylandfish](https://forum.literatureandlatte.com/u/Drylandfish)\
**Post date:** [June 19, 2023, 1:44am UTC](https://forum.literatureandlatte.com/t/scrivener-appimage/46430/9 "2023-06-19T01:44:08Z")

</div>

Thank you very much!!

---

<div class="post-metadata">

**Author:** ![Adrlopgal](https://forum.literatureandlatte.com/user_avatar/forum.literatureandlatte.com/adrlopgal/32/28075_2.png) [@Adrlopgal](https://forum.literatureandlatte.com/u/Adrlopgal)\
**Post date:** [June 21, 2023, 9:27pm UTC](https://forum.literatureandlatte.com/t/scrivener-appimage/46430/10 "2023-06-21T21:27:42Z")

</div>

In case the Dropbox link was removed, the Appimage version is also uploaded to this page:

> **[Scrivener for Linux](https://www.appimagehub.com/p/1673680)**
>
> Scrivener is a word-processing program and outliner designed for authors. Scrivener provides a management system for documents, notes and metadata. This allows the user to organize notes,...

A big thank you to those who took the trouble to create and maintain it.

This is the version I still use to this day. If Scrivener was available natively for Linux, they’d have my money and I’d be looking for bugs to help the community. I think I’ll finish writing my entire five-book saga without that dream coming true.

Regards.
